OU Degree Class Calculator

This calculator is designed to use the results (or the possible/predicted results) from your Open University modules at level 2 and 3 to calculate which classification of degree you might get.

It is fairly simple, and works on the basis that you have done (or will do) 240 points at those levels, as seems to generally be the case. Hence it can’t deal with transferred credit, etc. Please note that none of the details you enter are sent back to me or saved anywhere – all the calculations are done by the web page on your pc.

This calculator is based on the information in the OU’s explanatory PDF, which can be rather confusing. [update: I had previously linked to the OU's own "qualification planner", which has now been discontinued]. Using this calculator might also give you an insight into how you could improve your classification.

To calculate your degree classification, use the “Add Module” button below to add the modules you have done or intend to do, specifying their level, how many points each module is worth and the grade you received (or hope to get). n.b. On some degrees certain modules cannot be counted towards the degree classification. If this is true of your degree do not enter those modules.

Then click the “Calculate Degree Classification” button to see your classification calculated below. You can use the following worked example buttons to see pre-entered examples.

 

disclaimer: This is entirely unofficial. While I have done my best to ensure it works, it may well calculate your classification wrongly under some circumstances. No responsibility can be taken for any misunderstandings or inconvenience caused. Update (22/07/2012) : But since creating this well over a year ago, no-one’s complained that it got it wrong, so that’s hopefully reassuring. ;)
Update regarding transferred in credit: A commenter, Louise, has helpfully suggested that it seems possible to enter your relevant transferred in credit as points at distinction level to make the calculator work. eg If you have the maximum of 240 points of transferred in credit, 120 of the points would count for level 1 (doesn’t count towards classification), 120 points should be entered as a 120 point module at level 2 with grade distinction, and level 3 modules should be added as usual. This seems a bit generous of the OU, to give maximum credit for transferred in credit, but it seems to work. Any thoughts or interesting results, please leave comments. Thanks!

 

Module title/ref Level Points Grade

 

150 comments

1 ping

  1. vanessa says:

    Thankyou for posting this calculator online, it is so hard to work out the eventual mark i will get. From your calculator i have realised that i am on the cusp between two grades so i will have to try extra hard to go for the higher one !!

    1. Stella Gizzi says:

      Fantastic and so easy, thank you

  2. jay says:

    Thanks a lot for taking the time to do this! I imagine the programming was a lot easier than making sense of the ‘working out your class of honours’ document ;)

  3. Rowena says:

    Brilliant! Give the angel who created this calculator a halo. I needed a degree, maybe even a PhD, to understand the OU Classification document, but this is child’s play.

  4. Duayne Sanford says:

    Does this apply to all University degrees?

    1. admin says:

      @Duayne, as specified above this is designed to apply specifically to open university degrees.

  5. Stephanie says:

    Thanks a lot. The explanation on the OU website is very difficult to understand. Yours is perfect.

  6. Kevin says:

    Hope you don’t mind I just posted this link on my course forum as it such a handy tool.

    Thank you.

    Kevin

  7. Jan says:

    Why has the OU not adopted this exemplary method of working out the degree classification instead of that mind-bending pdf offered as an ‘explanation’? None of us doing OU degrees is daft, but I would imagine most students give up well before getting to the end of it.

    I have discovered that I am on track for a First (now I have managed to work it out using your calculator). Someone at the OUPS weekend in Warwick mentioned it existed. It was quite hard to find but very worth the hunt. Thank you so much for taking the trouble to develop this. Lobby the OU to feature it!

    Best wishes
    Jan

    1. admin says:

      Glad to hear you found it helpful Jan, and good luck with your degree.

      Sorry if this page was hard to find, but all I can do is make it available – the rest is up to Google and anyone that links to it.

  8. natalie says:

    Thank you very much for taking the time to do this. Not only is it so much easier to use than the silly document the OU provide BUT it has also shown me on the day that I realised I wasn’t going to pass this course with the mark I wanted that, as long as I pull my socks up or even stay the same I’m going to be all right. THANK YOU

  9. Rose says:

    Great! I get the same results with this as I do with my own calculations, so I reckon my maths was correct, for once.

  10. David says:

    Thankyou for creating a really useful tool. In particular, I like the fact that your worked-examples illustrate (where appropriate) the partial disregard of full 60-point single courses – the ability to take only 30 points of a 60-point course that has already been passed, and interpolate into the “missing” 30 points the (hopefully) better grade from a 30-point course that might additionally (in the future perhaps, providing the present offer of degree is not accepted, very important!) be taken inorder to improve the class of degree, instead of always having to take yet another 60-point course inorder to do so! – depending on one’s personal requirements of course . Prior to finding your calculator, I had asked the OU this very question and had it confirmed that indeed this partial disregard is permissible and seemingly automatic – but nowhere in the OU literature itself could I find this explained or exemplified. So, many thanks again for your excellent piece of work.

    1. admin says:

      David, thanks for the comment. I’m glad you found the calculator useful, and I’m grateful for your information regarding the partial use of a course. It seemed only fair that this should be the case, but I agree that the literature is less than clear on this point, so I’m pleased to hear the advice you got from the OU seems to back up my assumption.

  11. Ryan says:

    Thank you for this calculator, they need something like this on the offical website!

  12. Mark says:

    Amazing tool – I would like to echo all the other comments about how easy this is to use – much much better than the over-complex pdf file which the OU seemed to love so much?!

  13. Louise says:

    Hi….
    This has considerably cheered me up after recently coming out of my OU exam and completely fearing the worst! If this calculator is correct even if I haven’t done quite as well as I had hoped I might, then there is still hope to make up ground on Level 3 courses!
    Just to check, is this calculator correct for all OU degrees (I am doing the LLB Law) and also, if this calculator is correct then I am right in thinking that you can only ever come out with a First if you gain a Distinction at Level 3?
    Many thanks to whoever created this page and took the time to produce the calculation table above! I, like most of those above cannot understand why the OU have not produced something the same themselves!

    1. admin says:

      Hi Louise,

      I’m pleased this has been of some use. As far as I’m aware this calculator should work for most degrees, although I’m sure there are factors which will complicate matters such as added credit, and other factors I’m not aware of. This is why I put the disclaimer up and maybe it’s why the OU doesn’t have a similar tool on their site.

      If anyone does find that it calculates something wrong please let me know by posting a (constructive) comment, and I’ll do my best to correct it the calculator.

      Regarding getting a First – yes, my understanding is that you can only get a first by getting at least 60 points at distinction grade for the quality assurance test, which only applies to the level three modules.

  14. natalie hamnett says:

    Thank you for publishing this website. My other half has just received his final exam results after studying with the OU over a period of 12 years and I’m too excited to wait for his classification, so have just put in all his marks. Very pleased with the results! thank you the PDF from the OU is far too complicated.

  15. Russ Blaine says:

    This is great. Thanks, As people have commented, this should be the way the OU presents degree classification. It has confirmed what I suspected I needed to do to achieve my aim in my final module

  16. Helen Nolan says:

    Thank you so much for this very useful resource. You really should try to get the OU to use it, as their current “explanations” are as clear as mud. This is extremely easy. Thank you for taking the time to develop this and for making it available to all of us.

  17. Kimthebookworm says:

    Hi what about level one courses that only have a pass or fail?

    It seems I can only enter level 2 or level 3 courses and cannot enter just ‘pass’

    I did a compulsory level one course to my degree.

    I do love this calculator though – just wondering about the level one pass.

    Thanks!

    1. admin says:

      Hi Kim.

      To quote the OU Degree Classification Document, “We calculate the class of your bachelors honours degree using the results on all your graded OU or approved collaborative scheme modules at OU second level or higher – up to 240 credits.“.

      So I’m not sure if level one modules ever have a grade, rather than pass/fail – I’ve only done one, which was pass/fail. But either way the results of level one modules can’t count directly towards your degree classification so they aren’t relevant to this calculator.

      Of course we assume that you’ve done enough points (360) to get the degree in the first place!

      1. Pip says:

        Hi, Some level 1 courses have a grade e.g. DD101 which is a compulsory 60 pointer BUT your credits have no bearing on your degree classification :-(

  18. Andrew says:

    Hi, thanks for this very useful calculator it is much appreciated.

  19. Jess says:

    I too would like to thank you. I also agree, have you considered submitting this to OU? They really could darn do with it!

  20. Anne says:

    What a gem this calculator is. I was unable to make any sense of the OU calculator, but this is super user-friendly. So grateful, thanks.

  21. John says:

    Is there anyway you can amend this so I can calculate my degree score from only 180 credits. I was able to transfer 180 in.

    Cheers

    John

    1. admin says:

      Hi John, I’m afraid the short answer is no.

      Aside from being a bit busy (with OU as well as other things!), I’m not even sure how transferred credit affects the degree class. Might it be the case that it’s considered a module credit of a certain value, and can be entered as dummy modules? Perhaps the calculator might be of indirect help by giving similar examples.

      But if you find out, and can explain how the transferred credit does work by all means please let me know, and I can try thinking about adding a facility when I have the time.

      1. Sophie says:

        Hi, I’ve transfered credits from previous study, and as far as I know, your degree classification is only based on your OU module results. They don’t take into account the grades of previous study.

        Hope that helps,

        Sophie

        1. admin says:

          Thanks Sophie. That’s interesting to know, but I’d need to know how to calculate a degree classification from 180 credits (for example).

          All the instructions and examples – mainly from the pdf document – seem to be based on having 120 level 3 points and 120 level 2 points. A total of at least 240.

          If someone can explain this I could consider building it in, but again, no promises because my time is limited.

          1. admin says:

            I’ve just noticed that the OU pdf explains that if you have transferred in credit, it doesn’t count towards your classification, and OU course results are adjusted to be considered pro-rata. Maybe I’ll try and build this in at some point, but it makes my head hurt a bit thinking about it!

  22. Helen says:

    Thanks so much for taking the trouble to build and publish this – it’s very useful to those of us who are utterly bamboozled by the OU’s explanation.

  23. Joe says:

    You’re brilliant. Thank you for setting up this calculator. I now realise that I’m sweating over a level two module that will have barely any (if, in fact, any) bearing on my overall degree class. I had an inkling that it didn’t couldn’t find any info like this on the OU website.

    thank you, thank you

  24. edyta says:

    Does anyone know what grade do I need from my Ba hons degree to go onto primary teaching?

  25. Sheena says:

    So useful! Thank you!

  26. Ginny says:

    Brilliant page, thank you! And the results are surprisingly encouraging … if only I spent more time revising than imagining what I might get :) Have posted link to my OU forum – thanks again.

  27. DMP says:

    I’m a little confused – the quality assurance thing implies that if you get 60points at distinction level you will get a First regardless of your other scores? that cant be right?

    1. admin says:

      Hi.

      The calculator works according to my understanding that…

      …only level three points count towards the QA section.

      …as the OU document states, “You need to satisfy both tests to qualify for the class of honours.”. So the QA section is to confirm your original classification. It can “drag” your grade down, but it can’t increase it – the first worked example shows this happening.

      Hope that helps.

  28. Ray says:

    Thank you for writing this degree classification calculator. It has helped me understand the complicated OU explanation much better. However, I think there is a error in the calculator.

    The OU explanation states the following, “We give your best 120 points from Level 3 courses twice their score. Then we add to that score the rest of your points above Level 1. This gives a total number of weighted grade points.”

    As I understand the above OU explanation, this would mean that any other modules at level 3 are not multiplied by a factor of two. The calculator seems to multiply the scores of all modules at level 3 by a factor of 2.

    Example: A student does 5, 30 point modules at level 3 and 3, 30 point modules at level 2.

    Please confirm. Thanks and best regards.

    1. admin says:

      Hi Ray. Thanks for the comment.

      Having looked at this, I agree with your understanding of the explanation, but this is exactly what the calculator does when I try it – I admit I haven’t picked through the program again.

      To expand on your example, I enter eight modules titled a, b, c, d, e, f, g, h. I enter that they are all 30 points and all results are Grade 2. Modules a-e (five modules) are Level 3. Modules f-h are Level 2.

      The calculator multiplies the points for modules a-d (four courses adding up to 120 points) by two (because we got grade 2) and by two again (because they’re the best 120 points from Level 3 as you say). This makes 4 x (30 x 2 x 2) = 480.

      The calculator multiplies the points for modules e-h (also four modules adding up to 120 points) by two (because we got grade 2) and that’s all, despite module e being Level 3. This makes 4 x (30 x 2) = 240.

      The total weighted grade points value is 480+240=720.

      Module Level Points Grade Weighted Grade Points
      a————–3——-30 ——-2 ( x2 )——-120
      b————–3——-30——-2 ( x2 )——-120
      c————–3——-30 ——-2 ( x2 )——-120
      d————–3——-30——-2 ( x2 )——-120
      f————–2——-30——-2—————60
      g————–2——-30 ——-2—————60
      h————–2——-30 ——-2—————60
      e————–3——-30 ——- 2—————60
      Weighted Grade Point Total: 720

      This seems fine to me. If you think this is wrong or you can give a more detailed example which doesn’t work, then please let me know.

  29. Raymond says:

    Hi,

    Thanks for your quick response. I have entered a more detailed example into the calculator which I believe is giving an incorrect score. Please see worked example below:

    Calculating Weighted Grade Points
    Module Level Points Grade Weighted
    Grade Points
    TT381 3 10 2 ( x2 ) 40
    BZX629 3 30 2 ( x2 ) 120
    B322 3 30 2 ( x2 ) 120
    BZX628 3 30 3 ( x2 ) 180
    M362 3 20(partial use) 3 ( x2 ) 120
    M256 2 30 2 60
    M255 2 30 3 90
    M257 2 20 3 60
    M362 3 10(remainder) 3 30
    T320 3 30 3 90
    Weighted Grade Point Total: 910

    If I understand the OU degree classification correctly, then in the above example, the module T320 at level 3, should be counted as a level 2 module. Otherwise one would effectively get penalised for completing more than 120 points at level 3.
    Also, the 10 remaining points from M362 should also be counted at level 2.

    So, the best level 3 points are counted at level 3, and rest of the level 3 and level 2 modules are counted at level 2.

    Hope this makes sense. Thanks in advance for having another look.

    1. admin says:

      Hi Ray,

      Thanks for posting your example. I’ve had a look, and sorry but I still can’t see the problem.

      Firstly, I’d suggest it confuses matters to talk about “counting level 3 modules at level 2″. Back to the OU pdf, “We give the best 120 points from Level 3 courses twice their score”. All other points (up to a total of 240 points) are only counted once, regardless of level, but they do all get counted.

      The weighted grade points are calculated as:
      [points for module] * [module grade] * 2 (for doubled modules)
      [points for module] * [module grade] (for undoubled modules)
      The module level is irrelevant (except when considering which results get doubled up).

      In fact, it would be better to get modules ignored and get fewer points, and to not get “double points”, since fewer weighted grade points means a better degree classification, but 240 points will be considered, and 120 of them will be doubled whether we like it or not, so better to get the doubled ones with a high module grade, otherwise they will drag the classification down. eg 30 (points) * 4 (grade) * 2 (doubling) = 240 weighted grade points for just one module – ouch!

      In your example those “best 120 points” are 30+30+10=70 points at grade 2 and the rest (50 points) at grade 3. So, (70*2) + (50*3) = 140 + 150 = 290. Multiply that by 2 to double up gives 580 weighted grade points.

      Then the “undoubled points” (where level doesn’t matter):
      30 at grade 2 gives 30*2=60 weighted grade points.
      The remaining 90 are all at grade 3 which gives 90*3=270 weighted grade points.

      The grand total is therefore 580+60+270=910 as calculated.

      The T320 points and the remaining M362 points aren’t being ignored? I wouldn’t want to say they are “counted at level 2″ because of the potential for confusion, but they are simply multiplied by the grade and added to the total in the same way as the points for level 2 courses are.

      If you were to add another module – say another 30 point level 2 module with a grade 4 result – then it would be ignored, since it takes the point total over 240 and it’s the lowest grade, hence the least useful. In this case the calculator just puts “not required” in the weighted grade points column for that module.

      Hope this is clear enough. Again please let me know if there’s something I’m missing.

    2. Steve says:

      Raymond,

      I think the key point is that degree qualifications are based on the best 240 points overall, of which 120 have to be at level 3.

      In this example, I’ve gone to the extreme of 6 x 60 pointers at level 3 (being 360 points satisfying all criteria for a Hons degree).

      Module Level Points Grade Weighted

      1 3 60 1 ( x2 ) 120
      5 3 60 1 ( x2 ) 120
      2 3 60 2 120
      6 3 60 2 120
      3 3 60 3 not required
      4 3 60 4 not required

      Weighted Grade Point Total: 480

      As you can see, only the two highest level 3s got doubled. And only the four highest level 3s were counted (the top 240 points over level 2).

      Does that make sense?

  30. claire says:

    thank you, so much better than the OU website!

  31. Cathy says:

    Hi

    Having worked out my class it appears some of my modules do not count towards the classification. I am doing a law degree and even some of these are not counted, so can I be sure this calculation is accurate? I have carried 120 points across from previous OU study and doing the compulsory level 2 and 3 modules. Is this a true calculation for a law degree?

    Thanks

    1. admin says:

      Hi Cathy. I’m afraid the calculator comes “as is”, hence the disclaimer, and I think law degrees may be a bit non-standard. I got that impression from this blog post on Alan Fleming’s blog which you may find helpful.

      As for your credit from previous study, I would assume it counts in a similar way to modules which were purely for this course, in which case they shouldn’t make things any more complicated?

  32. Cathy says:

    That’s really helpful, thank you!! Just a little disappointed that all my hard work (and ‘okaish’ results) for level 2 modules of which I am taking 120 points across will have no relevance of my final classification!

    Sat here now wondering why I bothered to spend much time (wasted!) on these modules if they don’t count………………………….such a frustrating shame.

    Cathy

  33. Carole says:

    Thanks so much for taking the time to do this :-) make 100% more sense than the OU website!

  34. Jo Irvine says:

    On my 5th year with the OU and this is the first time I have had any idea of what my grade might be – thank you for finally making it clear!

  35. Ellie C says:

    Thank you so much for this super useful tool, I wish I had discovered it earlier. I recommend everyone at the OU uses this as sometimes it feels like you’re ‘working in the dark’ not knowing what’s a possible target to aim for. Thanks!

  36. Soraya says:

    Thanks very much for creating this awesome tool :D

  37. Neil Ruston says:

    Thanks for the calculator – shame it can’t take into account credit transfers. I have 240 points transferred and so only grade 3 modules count towards my grade. I guess as long as I manage 2 x distinctions and 2 x grade 2, I’ll qualify for a First class honours degree? Would you agree?

    1. admin says:

      As I mention above, the PDF mentions that if you have transferred-in credit the grade “thresholds are reduced pro-rata”. And it has tables of example thresholds. Off the top of my head it seem fair that the grades you describe would qualify you for a First, but don’t quote me on that…

  38. Dave says:

    Hi

    Just wondering if you know whether the OU has any discretion , in regard to the final degree grade it awards? i.e. if your score is just over the grade boundary , by few points do they have any discretion to give you a higher final grade ?

    Thanks

    1. admin says:

      I’m sure I remember being told that within a module there is an option for grade boundaries to be adjusted. If say, one year there was a particularly difficult exam and the pass rate was lower than usual, but I don’t know about degree classifications.

      Either way I suppose the OU would have to be able to explain the difference – since the module result wouldn’t match the predicted result from the assessment calculator, or the degree classification wouldn’t match that calculated by the method specified in the PDF.

      Maybe someone else can help with this?

  39. Woody says:

    Thanks for an excellent tool. Really useful.

  40. Dani says:

    Just want to chime in and say that this tool is fantastic and thank the admin so much for pulling such a user-friendly means of calculating the classification together! Why the OU hasn’t adopted a similar tool yet beggars belief.

  41. Samantha Morgans says:

    Hi there

    Many thanks for this and congrats on your hard work. The module I have just completed did not have the calculator on the student home page, however last years module did have, so I just presumed that the OU have decided to get rid of it.

    Anyway, my query is: how do we know exactly which module does not count towards the classification? My reasons for asking is that I have fiddled about with the grades and in doing so, a different module appears to be ‘not’ counted, that was for the previous grade I entered.

    Many thanks
    Sammi

    1. admin says:

      Hi Sammi,

      If more modules have been entered than are required for a given calculation then the calculator will use the best grades available. For some qualifications certain modules have to be used, but the calculator has no knowledge of this.

      Does that answer your question?

      Tim

  42. Tom Fenton says:

    Thank you so much, this is brilliant. The OU should have this on their site as opposed to the awful awful pdf document that means you require a master’s in maths and various other things in order to comprehend it! I’m into my last course and now what grade I need to accomplish in order to achieve the classification I need!

  43. Caroline says:

    Hi Tim

    Your fabulous calculator is so much easier to use than the one provided by the OU, thank you so much for sharing it.

    Best regards
    Caroline

  44. Lorraine says:

    Absolutely brilliant! So much easier than that pdf! Thank you!

  45. Kel says:

    Thanks for this excellent tool…in my 5th year so now know what my target point is .. : )

  46. Paul says:

    This is very good , many thanks, Can you state where in the OU information it deals with partial use of a module result to obtain the final result? The choice of the module for partial use can make a difference to the result.

    Many Thanks

    1. admin says:

      Hi Paul. I’m afraid I don’t know of anywhere where this is explicitly described. If you look back through the comments you should find one from David where he states that someone from the OU said partial use applies.

  47. user_friendly says:

    Thanks very much! Don’t normally bother to comment on things on the internet but this was worth it! Especially as I’ve just realised that I don’t need a particularly nightmarish level 2 I’m struggling through. And especially since I realised my OCAS is already enough to pass that particular level 2 and I can now forget about it and concentrate on other courses!

    Thanks again, you may have saved my degree. You’ve certainly made my day.

  48. Rami says:

    Thanks so much for posting this, its an absolute lifesaver! I had no idea where to start with the OU guidance, they really are crazy for thinking most people can fathom it! Anyway, your calculator makes life so much easier so thanks again!

  49. Francesca says:

    Just wanted to add my thanks, this is very helpful (:

  50. Sarah Hines says:

    Brilliant tool! So simple to use and takes all the confusion out of trying to work out your degree level yourself! Thank you

  51. Heather says:

    Why isn’t there an option for level 1? I can only select level 2 or 3, which means I can’t use the calculator :(

    1. admin says:

      Heather, to quote from the OU’s explanatory PDF (linked to in the original post), “We calculate the class of your bachelors honours degree using the results on all your graded OU or approved collaborative scheme modules at OU second level or higher – up to 240 credits.”

      Level 1 results aren’t included in the degree classification, you just need to pass them.

  52. Dawn says:

    Thank you! This is a brillant tool and has helped me realise the last 5 years haven’t been a waste.

    I’m going to share this so more people’s minds are put at ease. Time well spent.

  53. Michelle says:

    Just wanted to add my thanks. I’ve been lost and anxious since the OU took their calculator off the website. Now I can look at this every day until August for reassurance!

    Thanks again.

  54. Debbie says:

    Thanks so much for a fantastic tool. It’s put my mind at ease that I don’t have to produce a miracle to get a great classification after all! Now…back to the books.

    Many thanks again, a great boost to my confidence.

  55. Kevin says:

    Brilliant tool. I was so worried about needing at least grade 2 passes just to get the 2:2 my employer is looking for me achieving. I can rest easy knowing I just need grade 3 passes in my level 2 and 3 modules to get what I’m aiming for.

  56. John Foster says:

    A brilliant tool, many thanks for sharing!

  57. Simon Hall says:

    Thank you for posting this excellent tool, most useful for maintaining sanity…

  58. sally says:

    Hello!
    Thanks for this simple way to work out degree classifications- I am just finishing my final 2 level 3 courses- One I am on the higher end of a 2:1 (75 points) and the other I average at about 70 points. I am wondering if I would only need one of these to be 70 points plus to get a upper class degree- as this is the only one which will be double weighted? I am worried about me EMA for the slightly lower graded course.
    Thanks
    SALLY

    1. admin says:

      Oh, the confusion…

      Firstly, now they’re modules, not courses. Then, in the OU world, “points” refers to how long/intensive your module is – eg is it a 30 point module or a 60 point module. I think when you say points you’re talking about your course percentage based on your assignment scores? And then, what’s an “upper class degree” (something you get from Oxbridge? ;) ). Here I assume you mean a 2:1?

      Sorry if this all sounds pedantic but it’s easy to get tied in knots if you aren’t precise.

      Because you don’t say how many points your current modules count for (30 each?) or how you’ve done in your other modules it’s difficult to answer the question. In order to get a 2:1 you’d need get at least a grade 2 in at least 60 points worth of level three modules to pass the quality assurance element – maybe one 60 point module with a grade 2, or two 30 point modules both at grade 2. But that’s all you need at level 3.

      For instance this would get a 2:1:

      Level 3 Module 1 (60 points) – Grade 2
      Level 3 Module 2 (60 points) – Grade 4
      Level 2 Module 1 (60 points) – Distinction
      Level 2 Module 2 (60 points) – Grade 2

      (try it in the calculator)

      I hope this helps.

      1. sally says:

        Ok, so maybe it is easier if I write down what I have so far- and just for the record – no oxbridge status upper class degree is what the OU refers to :)

        So basically, in your chosen language- i have done the following modules at varying levels-

        Level 3 – 60 points- grade 2
        Level 3 – 60 points- grade 3 (most likely not finished yet)
        level 2 – 60 points – grade 2
        level 2- 30 points – grade 3
        level 2- 30 points – grade 3

        So what I am asking is really….the fact that my second level 3 module is going to most likely be a grade 3, am I still able to get a 2:1? The calculator says I will get a 2:1 with the above scores, but Im confused (also happy) as to why I get a 2:1 and not a 2:2
        Thanks :)

        1. admin says:

          So, as I mentioned, 60 points at grade 2 at level 3 could bag someone a 2:1, even if the other 60 level 3 points were “only” grade 4, but in that case some distinction level points at level 3 would be required to help out. If your points at level 3 are half grade 2 and half grade 3 then a grade 2 and a grade 3 at level 2 looks like it just scrapes you through a 2:1.

          As calculated by the calculator:
          Level 3:
          (grade) 2 * 60 (points) * 2 (because level 3 points count double) = 240
          (grade) 3 * 60 (points) * 2 (because level 3 points count double) = 360
          Level 2:
          (grade) 2 * 60 (points) = 120
          (grade) 3 * 60 (points) = 180

          240+360+120+180 = 900

          Which is just on the right side of the 2:1 boundary.

          For quality assurance use the best 60 points at level 3:
          (grade) 2 * 60 (points) = 120

          Again, just scraping through as a 2:1 according to the QA grade boundaries.

          I guess it could be argued that grade 2 results equate to a 2:1, and grade 3 results equate to a 2:2, and since your predicted grades are exactly half and half, you (just) get the benefit of the doubt, although I don’t make the rules so that might be a misleading way of looking at it.

          And as always the usual disclaimers apply to my sums and the calculator – no guarantees, but please feel free to check through it yourself.

          The OU pdf refers to an “upper second class” honours degree, but not an “upper class” one?

          Good luck with the rest of your studies!

  59. Sally says:

    Haha, yes I meant upper secondclass not upper class, ops! Been a long 3 years. Thanks for your help and explanations,
    Best wishes
    Sally

  60. John says:

    Hi

    Great tool, many thanks for this.

    Can you please confirm my assumption?

    In my case I have 240 credit transfer points from previous study.

    I have just got my final 2 level three results.

    Each of my 4 level three courses were 30 pointers. To cope with the weighted issue for credit transfers I doubled up the points for each giving.

    Level 3 grade 3 x 60
    Level 3 grade 3 x 60
    Level 3 grade 2 x 60
    Level 3 grade 2 x 60

    Does that logic stake up do you think?

    Thanks again

    John

    1. admin says:

      Hi John.

      To be honest I would be a bit careful with this one.

      As I’m sure you appreciate the calculator doesn’t cater well for transferred credit. Also, I mentioned elsewhere that the PDF specifies that “OU course results are adjusted to be considered pro-rata”. Well perhaps that’s a little misleading since the current PDF document – have they updated it? – specifies that it’s actually the grade thresholds for the first part of the calculation which are pro-rata’d according to the table now included in that PDF ( link here ). But your manual alterations to satisfy the requirements of this calculator may not match that table, and they will also affect the quality assurance, which should be calculated using your actual grades. There will always be sufficient (120) points for the qa part because 240 is the maximum you can transfer.

      Calculating it manually I would do the following:

      Level 3 grade 2 x 30 (x2) = 120
      Level 3 grade 2 x 30 (x2) = 120
      Level 3 grade 3 x 30 (x2) = 180
      Level 3 grade 3 x 30 (x2) = 180

      This gives a total of 600 which falls between 420.1 and 600 on the credit transfer grade boundary table in the PDF (just!) resulting in an Upper Second Class (2.1) degree. Then the quality assurance points are:

      Level 3 grade 2 x 30 = 60
      Level 3 grade 2 x 30 = 60

      This gives 120 which (according to the normal quality assurance tables) again just scrapes a 2.1 . As it happens this is the same result as your method of adjusting the points in this case, so that’s good.

      Congratulations on finishing your degree and on a great result (although usual caveats, etc – I make no promises that I got this right!).

  61. Sara says:

    Thank you for this tool. Does it only work for regular BAs or can it also be used to calculate BA Honours results? If so could you please let me know how? Thank you! :)

    1. admin says:

      Hi Sara,

      Sorry, I’m not really with you. Only an honours degree (either a BA or a BSc) has a classification in this way. A “non-honours” degree – usually referred to as an “ordinary” degree and obtainable from the OU with 300 points rather than the 360 for honours – does not have a classification in the same way so this calculator would not be relevant.

  62. helen says:

    I’m still a little confused about the credit transfer and how this translates into an overall classification. If I received 240 points from a credit transfer and a Pass 2 for both my level 3 OU 60 point course, is this also an Oxbridge 2:1? Hope you can help :)

    1. admin says:

      Hi Helen,

      According to my sums you should be pretty certain of a 2:1 with two good results like that.

      Like John (above) you’ve transferred in the maximum so you have the minimum “Amount of OU credit available” as far as the weighted grade table at the end of the OU pdf is concerned. In your case you have:

      Level 3 grade 2 x 60 (x2) = 240
      Level 3 grade 2 x 60 (x2) = 240

      So a total of 480, which, according to the last row of the table puts you well within the boundaries for a 2:1. Likewise you’re well within the QA limits.

  63. Julie says:

    Fab!! This works! It’s quick, easy and a reliable way to work out your degree class. Thank you for making this, it’s kept me on track throughout my ou degree, you’re a star!

  64. Steve S says:

    Hi Guys, just wanted to thank you for all your hard work in producing this. I started OU in 2010 with 3 opening modules (now discontinued).

    As a studious student I earmarked all my modules of choice prior to all these ‘transitional arrangements’ shenigans. In the good old days, the OU used to have their own classification calculator. This was subsequently removed during the latest shake-up when they were foolish enough to ‘modernise’ our StudentHome Pages.

    So, it was ‘goodbye degree planner’ (when you could punch in all your desired modules and hit a magic button to see what OU degree you could obtain) and ‘goodbye Classification Calculator’ (that determined your overall degree classification result).

    I have no idea why they were stupid enough to remove two key elements to every students planning. At the end of the day, every student wants to know what modules make up what degrees and if they perform well enough what classification it will lead to.

    It’s not good to get shot of such a calculator when prospective employers may ask what classification you are hoping to obtain – you couldn’t answer “I dunno as some idiot removed the calculator off the OU site and left me with some long-winded instructions how to work it all out”.

    So you are a lifesaver and have given OU students new hope to excel in certain modules with the expectation of reaching a 2:1 or a 1st.

    Steve

  65. Marina says:

    Thanks for this. Thought I could only ever get a 2:2 but I now know I could get a 2:1 if I try extra hard!

    1. marie mcgeown says:

      wish i’d known of this degree calculator earlier I have done two level 2 courses and gained 2 grade 4 passes. More disappointed now when i work out what i must get just to make it into a 2;2. If my calculation is correct I would need to achieve at the minimum a grade 2 and and Grade 3 pass at level 3. Are many other students in this position

  66. DOUGLAS LIDDLE says:

    Found this degree classification claculator as a result of a random search for similar documents

    Easy to assess future grades required for aparticular grade of degree

    A most useful explanation and claculation of a degree status

    Douglas Liddle

  67. marie mcgeown says:

    Gained Grade 4 passes in two level 3 modules so working out my degree for a possible 2;2 means I would need to get a grade 2 and a grade 3 pass at level 3. Wish I’d come across this great calculator earlier, a lot of hard work lies ahead but I hope I’m not on my own.

    1. marie says:

      Great to know about this device but not good to realise I have an awful lot to do just to manage a 2 :2

  68. Emma says:

    Hi, I am doing an International Studies degree and I did not do that well in one of the compulsory modules – TD223. I was just wondering whether anyone knew whether this essentially doesn’t matter.

    E.g.
    DD203 (60) x 2 = 120TD223 (60) x 4 = 240DD306 (60) x 2 x 2 = 240DU301 (60) x 2 x 2 = 240A326 (60) x 3 = 180
    This would be a 2:1 because you would add DD203 + DD306 + DU301 + A326 for the 240 credits as these are my best grades?

    Does it matter that TD223 is a compulsory module basically?

    Thank you

  69. Carole says:

    Thank you for this tool – since the qualification planner has been removed I really didn’t want to look at that PDF.

    Starting level 3 this year so this lets me know what I can expect at current level, and how hard I need to work to improve :)

  70. joanne smith says:

    Brilliant ……. saved me a job of trying to work out my grade!!

  71. caroline says:

    How does credit transfer of 240 points calculate along side 2 x grade 2 modules at level 3?

    1. admin says:

      Two 60 point modules? This gives you 120 points of available OU credit. Multiply 120 by 2 (because you got a grade 2 for each) and then by 2 again because your best 120 points are double weighted).
      120 x 2 x 2 = 480

      Looking at the last row of the table on page 7 of the explanatory pdf, 480 is between 420.1 and 600, so as far as I can tell you get a 2.1

      Again your best 60 points (for quality assurance) were at grade 2.
      60 x 2 = 120

      Which confirms a 2.1

      Best to double check my working yourself, but I hope that helps, and congratulations (assuming that’s what you got!).

  72. Dave Howden says:

    Brilliant, thanks a bunch.

  73. Kevin says:

    Hi

    Thanks for the calculator!

    One thing I don’t understand is if I put in

    Level 3 Distinction 1 x 2 x 60 = 120 (85%)
    Level 3 Grade 2 2 x 2 x 60 = 240 (74%)
    Level 2 Grade 2 60 x 2 = 120 (80%)
    Level 2 Grade 2 60 x 2 = 120 (73%)

    [= 600]
    (my scores)

    However, regardless of what grades I put in the for the grade 2s ie the lowest possible (70%) it’s coming up as a First class degree overall. I thought possibly it mattered your scores within each band, yet if I put in for example level 3 85%, level 3 70%, level 2 70% level 2 70% it’s telling me it’s a first. I didn’t think it was possible to get a first like this. Am I missing something?

    So, the quality assurance is that at least 60 points at grade 3 must be at distinction level, right? Let’s say I meet that. Then points wise I think a first has to be 600 or under, right? It seems to come up as 600, above, no? But I thought it depended on the exact score. So don’t see how if someone can get the lowest grade 2s and just one distinction that his/her degree would be a first.

    Any help? Cheers :)

    1. admin says:

      Hi. I have to be honest and say I’m not sure what you’re talking about.

      The calculator asks for four pieces of info for each module:
      Module Title: only for your own reference.
      Level: Levels 1, 2 and 3 roughly equate to the years of study for a full time degree.
      Points: Numeric value indicating how many points of study the module counts for.
      Grade: 1 (distinction), 2, 3 or 4.

      At no point is any kind of percentage required or used. Why do you keep referring to percentages? Where are you getting them from? After you get (or calculate) your module grade, the percentages you got throughout your module for TMAs etc are no longer at all relevant (which is why the calculator doesn’t require them). Only the final module grades matter. Does that answer your question?

      What do you mean by band? There are no bands.

      Also your post confuses grades and levels – “…what grades I put in the for the grade 2s… (sic)”, “…at least 60 points at grade 3 must be at distinction level” – No, 60 points at LEVEL 3 must be at distinction grade [to get a first].

      I’m happy to try and help, but as I’ve said before, this is potentially confusing, so it’s important to get the terminology right.

      1. Kevin says:

        Hi

        Sorry for any confusion writing “grade” instead of “level” etc. I just thought if you got a high score, let’s say getting very close to a distinction, eg 82% as opposed to only getting 71% it made a difference in how things were calculated and your chances of getting a better degree classification. Of course, I was wrong :)

        Anyway, I have received my classification from the OU and happy to say it’s a first.

        Thanks for the help.

  74. Tory says:

    After several sleepless nights and many tears in preparation for my upcoming exam, finding this has given me the first good night’s sleep I’ve had in ages! Thank you so much, this is an awesome tool! You are a marvel!

  75. Elaine says:

    Hi,

    After a truly disastrous exam yesterday I have been in utter despair. Using your calculator has indicated to me that (thanks to my other disastrous exam last year) even if I get the most rubbish pass, it hasn’t yet changed the class of degree I was already heading for.

    Thanks :)

  76. Terence Simmons says:

    Brilliance!

  77. Jan Hendon says:

    Thought I’d said thank you before Tim, but can’t find the thread, so another (very big) thank you. Your site has been a life saver in calculating which modules to study and the grades I need… (verging on ‘OCD’ ;-)) Has become one of my favorite procrastination tools :-), second only to Surf Teddy :-D – FB groups are of course top of the list… ;-)

  78. Richard says:

    I’m just wanting to add my thanks and amazed the OU website does not carry a tool like this to help students see how well their study is going in earning a degree qualification.

    I had a very dodgy Level 3 exam in October and just got the result! 71% so managed a Grade 2 pass! Woo hoo! Punched this in to your calculator and it looks like even if I scrape a grade 4 pass on my final Level 2 module I will still get a 2:1 degree! Brilliant news!

    I’ll still try for a better result but it really does take the pressure off.

    To everyone out there working, looking after families and fitting in OU study just keep at it! There will be light at the end of the tunnel and hopefully a lovely graduation ceremony to celebrate with friends and family.

    Richard

  79. Sarah says:

    thank you for making this degree class calculator, it is 100% accurate, i just got my final grade and was exactly the same as you calculator predicted.

  80. Dougie says:

    Want to echo all the other comments. I too found the OU’s explanation of how degree’s are worked out beyond my level of intelligence. Through your calculator I have now been able to work out that as long as I don’t totally muck up my final module I have a realistic chance of a 2.1 and (if I do really well) an outside chance of a 1st.

    I hope u have a patent the calculator so you can licence it to the OU for them to use instead of their confaluted explanation.

  81. Fatima says:

    hi everyone, this calculator has helped me a lot in giving me direction that i have to work really hard in my last two level three modules to get a first class degree..thanks a lot to the one who made this calculator!

  82. Karl says:

    Hello, i really am sorry for bothering you with a question you have probably already answered. But i am horrible at working this out, i have transferred 240 credits from previous study and studied 2 60 credit modules at level 3 for which i recieved a grade 2 pass and a grade for, i am struggling to find out what classification this would leave me with?

    Karl

    1. admin says:

      Hi Karl,

      It appears from your description that you have only 120 points available for the calculation (since the rest of your points are covered by our transferred credit). However I assume a typo in your question leaves me unclear as to what your actual second grade was – “for which i recieved a grade 2 pass and a grade for”.

      The grade boundaries for you are provided in the bottom row of the table at the bottom of the OU pdf.

      I would suggest you could enter your modules in the calculator above, and then enter a fake module – level 2, grade 4, 120 points – so the calculator will accept your entry. This way you can see the weighted grade points for your *real* modules (and ignore the displayed total which will include the fake module). Use your weighted grade point total with the table in the pdf, and work out your initial classification. Then the Quality Assurance calculation on this calculator should be correct (because it will ignore the level 2 module).

  83. Helena says:

    Hi,

    I just want to say that your calculator is not always correct. I have used it as a guidance to improve my degree classification. According to the calculator, one module at level 3 with 30 credits, with pass 3 should have helped me to improve my classification. However, when I called OU qualification department, they told me that this was incorrect and I would need to do 60 credits at level 3 with Pass 2.

    1. admin says:

      Hi Helena,

      Sorry to hear you’ve found the OU phone advice has conflicted with this calculator. Of course without knowing which modules you’ve done at which levels and what your grades were I have no idea why this might be or who is right.

      The calculator is based on the calculations from the OU’s own explanatory pdf, and in two years you’re the first person to suggest the calculator isn’t always correct, although you don’t provide example grades to back this up.

      So if you could provide more details, I’d be very interested in looking into the discrepancy. And of course if it turns out the calculator does get it wrong under certain conditions this would allow me to correct it.

      Thanks.

      1. Helena says:

        Hello,

        thank you for your response. I input following:

        B203 level 2 60 credits Grade 4
        B201 level 2 60 credits grade 4
        DU301 level 3 60 credits Grade 3
        B301 level 3 60 credits Grade 3
        which is third class honours, this was also correct using the calculator
        I wanted to see whether I could improve my qualification by adding B324 which is level 3 30 credits. I have input grade 2 as hypothetical result , and your calculator stated lower second degree. Then I repeated the same process using the same module but input grade 3 as a result and it still said lower second degree. However when I rang the OU before I registered for the B324, the lady on the phone told me that 30 credits at level 3 would not be sufficient. However I would be greatful, if you could have a look. whether this is correct or not. Maybe the person on the phone calculated it wrong.

        Helena

  84. Cathy says:

    Hoping for some help with degree class & choice of next course, if possible. Can’t use calculator as I have transferred credit. My overall aim is to get a 2:1. So far I have done:
    K254 – 30 pts, level 2, grade 3
    K260 – 30 pts, level 2, grade 2
    SK220 – 30 pts, level 2, grade 3
    A210 – 60 pts, level 2, distinction
    DD308 – 60 pts, level 3, grade 2
    B628 – 30 pts, level 3, grade 4
    Plus 240 pts transferred credit

    So, I need 30 pts at level 3 to get the Hons degree. What grade would I need to get the 2:1 I’m after? Given my bad result for B628, would I be better to do a 60 pt course next & offset other results? If so, what grade would I need to get in order to gain the 2:1? Any help or advice would be very gratefully received. Thank you.

  85. Chris says:

    Thanks so much for this terrific and clear tool.

    I have done well so far, but until this evening, I thought I only required three grade 2′s and 1 distinction at level 3, to bag a first.
    I have 60 credits at distinction but that’s for M208: a level 2 course. All my other courses are grade 2′s. The OU website has a paragraph that hints something about needing to equal or better your previous quality assurance classification: but it is very unclear, so I looked for a site like this to confirm my suspicions.

    It’s quite gutting to know that after doing so well on all my courses since 2010, I now realise that unless 2 out of 4 of my level 3 thirty credit modules are distinction: even with less than 600 weighted grade points, my initial classification of a first: drops to a 2:1. Also if I don’t get a minimum of two grades 2′s of the four 30 credir level 3 modules, it drops down to a lower second.

    It makes me wonder why I have put all the effort in sonce 2010, when all I had to do was get a bunch of grade 3′s and 4′s at level 1 and 2 and spend most of my time practising papers on level 3 courses. It seems to be mostly true that at level 3, 60 credits at grade 2 bags you a 2:1 and you can’t get a first without 60 credits at distinction at level three. Am I correct? Oh well, if so: onward and forward! Thanks anyway and the very best to all.

  86. Galya says:

    Dear Admin

    I am doing a law degree LLB which you stated already has a non- standard classification. I’ve read the link to Alan Fleming’s blog and the OU website to try a worked example:

    So at level two: if you get two distinctions that would give you 120 points.

    And at level three: if you get two grade 2′s that would give you 480 points.

    So 120 + 480 = 600. So as it is < 630 that would give a First Class Degree.

    Both sites mentioned above do NOT mention Quality Assurance Points. So if one does very well in the level 2 modules and gets a grade 2 in level three modules, that means coming out with a first class LLB. Is my calculation correct according to you?

    1. admin says:

      Sorry Galya, I’ve been meaning to have a look at this, but I’ve been too busy. As the law classification is non-standard I’m not sure what the details would be.

  87. Wendy says:

    Thanks for putting this up, I had brain ache trying to work it out. Up until now I was hoping to have clawed a first class degree, but sadly coming in at a 2:1. I’m going to reconcile myself to that and give myself a pat on the back as it’s not been easy.

    Sad thing is that my quality assurance mark comes out as a first. Oh well.

  88. Paul says:

    Just a quick note to express my thanks for this. A great improvement on the OU version -could have done with this three years back!
    Many thanks,
    Paul

  89. viki says:

    this is soooo brilliant – thank you – i got completely discombobulated by the OU ‘Expert’ explanantion

  90. Kelly says:

    Thank you for sharing this excellent tool. I have it bookmarked. Could not for the life of me understand the OU’s worked examples or explanations. This is so simple to use. Fantastic – you are a wonderful.

  91. Jhoque says:

    This is absolutely brilliant! So handy and motivating! But i just wanted to ask, how reliable is this? I mean is there a high chance, low chance or 50/50 chance of getting what the calculator has predicted?

    1. admin says:

      @Jhoque, as far as I’m aware this should calculate the degree classification correctly every time, assuming the module results are entered correctly, the degree is a straightforward one and there have been no non-standard corrections.

      The calculation is hopefully transparent so students can compare it to their own workings.

      Indeed, if anyone gets a different result to the result calculated here and they don’t have any kind of reason for the discrepancy, then I’d like to hear about it.

  92. Kitty says:

    Hi admin

    I wonder am I going to be the exception to the rule-I’ve entered my info into the calculator and it predicts a first class degree however I’ve been offered a 2.1, my results are:

    A210 level 2 – 60 points – grade 2 pass
    AA316 level 3 – 60 points – distinction
    U211 level 2 – 60 points – grade 2 pass
    E301 level 3 – 60 points – grade 3 pass
    A300 level 3 – 60 points – grade 2 pass

    My other 60 point module was a pass although it was just level 1.

    It did seem to me odd that a first was the suggested result because I only have one distinction, but it seems to have worked for everyone else!

    Hopefully I haven’t just entered the info incorrectly! Thanks for producing this very helpful tool.

    Kitty

    1. admin says:

      Hi Kitty,

      Thanks for the feedback and for listing your modules and results clearly.

      Having entered the results I get the same as you, so I’m a bit confused and if I were you I’d be taking it up with the course admins.

      Odd as it may seem it’s entirely possible to scrape a first with only one distinction result. In your case you’d have good enough results even without the inclusion of E301. So the only reason I could see for you failing to get a distinction is if one of the modules you’ve listed is not eligible to be counted towards your chosen degree; the explanatory PDF states “Each degree has a rule that specifies the modules that can be counted in classification” so any modules that can’t be counted should be left off when entering your results into the calculator.

      I hope you’ll return to let us know if that’s the case, or how it works out for you. Perhaps if you could share which degree you’ve been working towards we could have a look? Either way, well done on some good results!

      1. Kitty says:

        Thanks admin – the degree that I was working towards is BA (Hons) English Language and Literature – on closer inspection I think I can explain the result.

        My level one module and the two level 2 modules were all compulsory.

        Thereafter I was required to have 60 credits from a list of Literature modules at Level 3 and 60 credits from a list of Language modules also at level 3. These were AA316 (a literature module) and E301 (a language module). After that I had a free choice of any 60 point module. I chose A300 from the list of literature modules as my ‘free choice’.

        E301 must therefore go towards the classification of my degree ahead of A300, as I understand it, as it was a compulsory module.

        Really by undertaking A300 at level 3 it I was taking the difficult road as I could have done a less difficult course for 60 points to make up my 360 but I was a glutton for punishment!

        Still delighted with my 2.1 though!

        Thank you for your help,

        Kitty.

  93. Stephen says:

    Just got my degree and its class was exactly as the calculator predicted. Thanks.

  94. Andy Peters says:

    Hi,

    Great tool, so basically with a distinction at levels 2 and 3, plus the remaining relevant points, I will be awarded a first???

    Thanks in advance.

  95. Sue Daniells says:

    Hi, this is a great calculator but I think – despite my degree – I am being a bit thick. The calculator says I will get a lower second class degree, is this a 2:2? and how do I check?
    Thanks
    Sue

    1. admin says:

      Hi Sue,

      Yes, a lower second and a 2:2 mean the same.

      As for checking the result, you can work through the process yourself following the instructions on the PDF linked at the top – hopefully the calculator should give an insight into this since it works using the same logic. Alternatively, you could try and get someone at the OU to work it out from your module results for you, although I don’t know who, or whether they’ll be happy to do it.

  96. Peter says:

    I have just been awarded my degree and it was exactly as had been predicted….thanks :)

    1. admin says:

      Thanks for the feedback, and congrats on graduating!

  97. David says:

    Can’t fault the calculator. It does the job perfectly and I’d better get working hard now to grab those big marks ;)

  98. Ali says:

    Hi

    By using your calculator, it has made me realise that even if i do not complete the EMA i am working on to the standard i would like (4 days to go, still haven’t really started!), it is not the end of my journey to gain a first degree!

    It has boosted my confidence.
    Thank you so much

  99. Steve G says:

    Excellent tool! Great work. I now know that if get a distinction for my project, I can still scrape a 2.1!!

  100. louise says:

    HI for those that have credit transfers, if you put the transfer amounts in as distinctions eg i have 240 credit transfer so put 120 credits level 2 as distinctions in calculator and it works it out fine….the results all match what i’ve just been working out for an hour and combos…grrr….wish i’d found this tool earlier….lol

    1. admin says:

      Thanks Louise. That’s a really helpful suggestion.

  101. Julia says:

    I need to work my socks off
    Thank you for the helpful device

  102. Nick says:

    Hi, Can someone help me out. I’ve transferred 240 credits already. Due to some bad circumstances I passed one Level 3 Module with Grade 4. Is there still any chance of me getting a 2.1?
    Thanks

    1. admin says:

      Unfortunately you’ve neglected to specify how many points your Level 3 module was.

      Let’s assume it was a 60 point module (as is relatively common). And then let’s imagine you got a distinction for a further 60 point module (best case scenario). Then your weighted grade points would be calculated as follows:

      points * grade * 2_for_weighting

      60 * 1 * 2 = 120
      60 * 4 * 2 = 480
      Total = 600

      According to the table at the end of the explanatory pdf, since you have only 120 points of OU credit available for the calculation you use the last row of the table and 600 points could scrape you a 2:1. But only just, so you would need to ace the rest of level 3. This would also pass the QA test.

      Alternatively you can use Louise’s suggestion (a few comments up) and just put in 120 points of level 2 study with grade distinction to use the calculator. This seems to work. The OU seem to (generously) assume all your transferred in credit was of the highest possible standard.

      1. Nick says:

        I’m not sure what you mean by points but it was 30 credits.
        I did what Louise suggested and predicted that I will get a Grade 2 for the others. He is what I got

        Previous—Level 2—120—1—120
        SK320—-Level 3—30—4 (x2)—240
        SXL390—Level 3—30—2 (x2)—120
        SXN390—Level 3—30—2 (x2)—120
        S377—Level3—30—30—2 (x2)—120

        That gives me a weighted grade point of 720
        So a 2.1
        Is this right?

        1. admin says:

          Hi, Thanks for providing more details.

          Firstly, to clear a couple of things up.
          Yes, we are talking about the same thing with points/credits. In my defence they definitely used to be points (see here) but no matter, I think credits is probably a better term going forward for clarity.

          Secondly, I appear to have messed up the link to the explanatory pdf in my previous comment.

          But yes, I think your conclusion is correct. The “proper” way to do it would be to just calculate the weighted grade points for your level 3 study and use the bottom row of the PDF table. Obviously it’s good that only 30 credits are at grade 4 rather than the 60 I had presumed, since it means you don’t need to ace the other modules.

          So, strictly speaking, your weighted grade points (not including transferred in credit) could be as follows:
          mod1 30 * 4 * 2 = 240 (completed module)
          mod 2 90 * 2 * 2 = 360 (all other modules bundled together for convenience and assumed to be at grade 2)

          Total = 600

          And again, according the bottom row of the PDF table, that scrapes a 2:1. If you get 30 points at a higher grade, great, and other combinations will obviously mean other results but Louise’s workaround should deal with any options you want to check.

          I wish you luck, but remember that if you don’t get a 2:1 it isn’t the worst thing in the world either. Circumstances can happen to all of us and despite being painfully close to a 2:1 myself I’m perfectly proud of my 2:2. :)

      2. Nick says:

        I thought I had blown it but thanks to you I now know what I need to get.
        Thanks for creating this calculator and you help!!

  103. Vanessa Gilbert says:

    Haven’t read all the info but this calculator seems to work for Open degrees. In my case, BA(Hons) in Modern Languages it calculated 600 points (so a First according to Clevernet) when in fact, OU calculated 660 points.

    Vanessa

    1. admin says:

      Hi Vanessa. Thanks for commenting but I’m a little confused. You say the calculator works but then suggest the points don’t match? If you were willing to post how many modules you did (including what level, how many points and the grade you got for each) I’d be interested to take a look. Which modules they were doesn’t really matter, as long as they’re all eligible to contribute towards your classification.

  1. Calculate your Open University degree classification | Insert Witticism Here says:

    [...] have just found this and though it worth a men­tion and link: Cleveret’s Open Uni­ver­sity Degree Class Cal­cu­lator. It seems to do all the hard work cor­rectly, includ­ing cal­cu­lat­ing the qual­ity [...]

Leave a Reply

Your email address will not be published.

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>